- ATEX thermometers
- temperature sensor with connection cable
- flameproof encapsulated temperature sensors
- built-in temperature sensor with connection head or plug
- high temperature thermocouples
- mineral insulated metal sheated thermocouples and resistance thermometers
- measuring inserts
- groove thermometer
- temperature sensor in encapsulation
temperature sensor with connection cable
Temperature sensor for measuring the temperature of process media and components with connection cable for connecting, plugging in or screwing into the corresponding measuring points.
Measuring range:
- -40...+200°C (depending on the cable insulation used)
- shielded and unshielded connection cables as well as
- selection of different insulation materials depending on the area of application
Measuring tip:
- from Ø2,5mm
individual choice:
- of process connections for the respective installation conditions
Connection types:
- free cable ends, connectors, terminal box with/without transmitter
Special designs:
- cable resistance thermometer with oil barrier for determining temperatures in pressure-loaded systems with oily medium (max. pressure 10bar); whereby there is a tensionable passage point for the thermometer into the media space. Instead of the oily medium, pressure- and dust-loaded measuring media are also possible.
- combination with VA corrugated hose or spiral hose
- additional protection tubes and angled designs
- temperature sensor in type of protection increased safety "e" and protection by housing "tb" for temperature detection of process media and components with low and medium temperature loads
Explosion protection (gas and dust atmospheres):
- intrinsic safety, increased safety
- zone 0 and 1
Classifications:
Ex II 1G Ex ia IIC T6-T1 Ga (IECEx und ATEX)
Ex II 1G Ex ia IIIC TX Da (IECEx und ATEX)
Ex II 2G Ex ib IIC T6 Gb (ATEX.
Ex II 2D Ex ib IIIC Tx IP 6X Db (ATEX).
Ex II 2G Ex e IIC T6 Gb (ATEX)
Ex II 2D Ex tb IIIC T80°C IP65 Db (ATEX)